AEROFIXX technical support
Troubleshooting help to get you started!
Practical and easy-to-use: With the AEROFIXX application tool and AEROSANA VISCONN sealant from pro clima, you can quickly seal transitions between different building components in an airtight manner – both indoors and outdoors! Thanks to its double functionality, this convenient airtightness tool can spray sealant or else apply beads of sealant. As a result, locations that are difficult to access are no longer a problem!
The best results are obtained when the sealant material is inserted correctly, the technician is able to handle the device properly and the AEROFIXX application tool is in perfect working order. To ensure all of these requirements are achieved, we have produced a series of short videos (with English subtitles) on the most important aspects of handling, working with and cleaning the AEROFIXX spray gun.
In these short videos, you can find out everything you need to know about using AEROFIXX!
Quick start: AEROFIXX essentials
AEROFIXX quick start
How do I start up AEROFIXX? This video quickly takes you through all the steps required to make AEROFIXX ready to use. The short videos for each step are available in our overall playlist.
Changing the foil cartridge
Is your cartridge of sealant empty? This video shows you what to take into account when changing the tubular cartridge and how to start spraying again.
Use after an idle period
AEROFIXX may be left lying unused and uncleaned for a few weeks. The sealant material in the tubular cartridge will still be fresh. This video shows the steps that need to be taken when starting to use the device again after an idle period.
How AEROFIXX works
The most important factor in the mode of operation of AEROFIXX is its clever air pressure system. This video explains precisely how it works and how this affects the spray finish.
Step-by-step: Using AEROFIXX
These videos deal with preparatory steps and the proper operation of AEROFIXX
1. Pressure setting and compressor requirements
2. Default setting of the pressure reducer on AEROFIXX
3. Release and lubricating agents
4. Inserting the tubular cartridge
5. Cutting the tubular cartridge
6. Inserting the material nozzle and screwing on the spray head
7. Continuous downward pressure on the spray head
8. Screwing in the air nozzle
9. Setting the spray head to spraying
10. Fine adjustment of the air-material ratio
Spray finishes and types of surface
11. Spraying onto smooth surfaces with AEROSANA VISCONN
12. Spraying onto porous surfaces with AEROSANA VISCONN
13. Spraying onto smooth surfaces with AEROSANA VISCONN FIBRE
14. Spraying onto porous surfaces with AEROSANA VISCONN FIBRE
15. Correcting defects with a brush
16. Spraying over a gap
17. Embedding fleece
Line/bead application
18. Line application with AEROSANA VISCONN FIBRE
19. Applying a bead of Orcon F (without an air nozzle)
Quality assurance
20. Checking the application thickness
Storage and cleaning
These videos provide useful tips relating to storage, cleaning and more.
21. Storing and transporting AEROFIXX
22. Storing the tubular cartridges
23. Cleaning the material and air nozzles
24. Troubleshooting: cleaning the spray head
